2 specifying a network search range, Adding an snmp broadcast discovery – Konica Minolta PageScope Net Care Device Manager User Manual
Page 110
Device List
3
Device Manager
3-80
3.10.2 Specifying a network search range
To search for devices, the SNMP broadcast discovery, SNMP unicast
discovery, or SNMP multicast discovery can be specified. Specify a search
range depending on each search method.
Adding an SNMP broadcast discovery
Specify the broadcast address used for the SNMP broadcast discovery.
1
Click the [Add] button for "SNMP Broadcast Discovery".
2
Select a setting method.
–
[Specify Broadcast Address]: Directly type in the broadcast
address.
–
[Specify Subnet]: Type in the network address and subnet mask.
The broadcast address is automatically calculated from the typed
in address.
3
Specify the necessary settings, and then click the [Apply] button.
–
To clear the entered information, click the [Clear] button.
Function
Details
Specify Broadcast Address
In the format "xxx.xxx.xxx.xxx", type in the broadcast ad-
dress to be searched for.