Konica Minolta PageScope Net Care Device Manager - Manual (Page 114)

Device List 3
Device Manager 3-84
3.10.3 Specifying a SNMP setting
SNMPv1 or SNMPv3 when searching for a device can be specified.
2
Reminder
Settings for timeout and the number of retry operations for searching for
a device can be specified on the Detail Settings page. For details, refer to
"Detail Settings" on page 3-164.
Adding SNMPv1 settings
Specify the settings to be used with the SNMPv1 protocol during an SNMP
broadcast discovery/SNMP unicast discovery/SNMP multicast discovery.
1
Click the [Add] button for "SNMPv1".
2
Specify the necessary settings, and then click the [Apply] button.
– To clear the entered information, click the [Clear] button.
Function Details
Community Name Type in the Read community name.
Port Number Type in the port number. The default is "161".