Adding an snmp unicast discovery, Adding an snmp unicast discovery -81 – Konica Minolta PageScope Net Care Device Manager User Manual
Page 111
Device List
3
Device Manager
3-81
Adding an SNMP unicast discovery
Specify the IP address range to be used in the SNMP unicast discovery.
1
Click the [Add] button for "SNMP Unicast Discovery".
2
Select a setting method.
–
[Specify Class]: Directly type in the IP address to start the search
and IP address to end the search.
–
[Specify CIDR]: Type in the IP address to start the search and prefix
in the CIDR format. The IP address to end the search is
automatically calculated from the entered prefix.
3
Specify the necessary settings, and then click the [Apply] button.
–
To clear the entered information, click the [Clear] button.
Specify Subnet
From the specified network address and subnet mask, the
broadcast address is automatically calculated and regis-
tered.
2
Reminder
To automatically register the subnet informa-
tion, specify the search range here.
For details, refer to "Specifying subnet settings"
on page 3-157.
Network Address
Type in the network address.
Subnet Mask
Type in the subnet mask.
Description
Type in a description of the subnet.
Function
Details