3 editing information of multiple devices, Editing information of multiple devices -134 – Konica Minolta PageScope Net Care Device Manager User Manual
Page 164
Device List
3
Device Manager
3-134
2
Reminder
Below "SNMP Settings", select whether SNMPv1 or SNMPv3 is used,
and then specify the community name or user name.
3.13.3 Editing information of multiple devices
Information of the registered multiple devices can be edited.
2
Reminder
The specifiable items differ depending on the device.
Only items that can be edited by the steps in "Editing device information"
on page 3-127 are refreshed. Items that cannot be edited by the steps in
"Editing device information" are not refreshed.
For details on the settings, refer to "Editing device information" on
page 3-127.
1
From the device information settings list, select the device whose
settings are to be edited, and then click the [Edit] button.
Authentication Password
Type in the authentication password to be used with
SNMPv3.
2
Reminder
The password must be entered when "Security
Level" is set to "Auth/NoPriv" or "Auth/Priv".
Privacy Protocol
Select "DES" or "AES-128" as the privacy protocol to be
used with SNMPv3.
2
Reminder
The privacy protocol must be specified when
"Security Level" is set to "Auth/Priv".
Privacy Password
Type in the privacy password to be used with SNMPv3.
2
Reminder
The password must be entered when "Security
Level" is set to "Auth/Priv".
Function
Details