4 switch-on reaction of the field bus module, Switch−on reaction of the field bus module, 4 switch−on reaction of the field bus module – Festo Кабели и принадлежности User Manual
Page 80
4. Commissioning
4−34
Festo P.BE−SPC200−COM−PDP−E N en 0901c
4.5.4 Switch−on reaction of the field bus module
Please note
When projects are loaded with WinPISA, the field bus modĆ
ule is re−initialized. There is then no exchange of data until
the field bus module is re−configured by the master.
Information on the switch−on reaction of the SPC200 can be
found in section 4.7.1 as well as in the user manual for the
SPC200. The following diagram shows the switch−on reaction
of the field bus module. Detailed information on the fault diĆ
agnosis can be found in chapter 6.
This manual is related to the following products: