Festo Кабели и принадлежности - Manual (Page 74)

4. Commissioning
4−28
Festo P.BE−SPC200−COM−PDP−E N en 0901c
Bit Explanation Meaning
5 Sync_Req log. 1": Activate SYNC
6
7 Unlock_Req
Lock_Req Bit 7 Bit 6
0 0
0 1
1 0
1 1
min T
SDR
+ SPC200 parameters may be
overwritten
SPC200 released for other masters
SPC200 blocked for other masters
SPC200 released for other masters
Bytes 2 and 3: WD_Fact_1
WD_Fact_2
Bit Meaning Explanation
Range 1...255:
The response monitoring time of the SPC200 is transmitted with these two
bytes: T
WD
[s] = 10ms * WD_Fact_1 * WD_Fact_2
Byte 4: Minimum station delay responder (min T
SDR
)
Bit Meaning Explanation
The minimum time the SPC200 must wait, before the reply telegram may
be sent to the DP master.
Bytes 5 and 6: Ident_number
Bit Meaning Explanation
Transmission of the Ident number (= 00C8
H
) of the SPC200.
Parametrizing telegrams to the SPC200 are only accepted if the
transmitted and the programmed Ident numbers are the same.