Festo Кабели и принадлежности - Manual (Page 143)

A. Technical appendix
A−7
Festo P.BE−SPC200−COM−PDP−E N en 0901c
A.3 Technical specifications
Type SPC200−COM−PDP
Temperature range
Ĉ Operation
Ĉ Storage/transport
− 5 ... + 50 ° C
− 20 ... + 70 ° C
Weight 80 g
Relative humidity 95 %, non−condensing
Field bus
Ĉ Design
Ĉ Transmission type
Ĉ Protocol
Ĉ Baud rate
Ĉ Cable length (depending on baud rate and
cable type)
Ĉ Loading capacity of positive power supply
(P5V) pin 6
RS 485, floating
Serial asynchronous, half−duplex
PROFIBUS−DP (standard slave)
tested as per DIN 19245 parts 1 to 4;
EN 50170 vol. 2
9.6...12000 kbits/s, automatic baud rate
recognition
Up to 23.8 km
Max. 100 mA
CE symbol (declaration of conformity)
è
www.festo.com
In accordance with EU EMC Directive
Vibration and shock
Ĉ Vibration
Ĉ Shock
Tested to DIN/IEC 68, part 2−6
0,15 mm path at 10 ... 58 Hz;
2 g acceleration at 58 ... 150 Hz
Tested to DIN/IEC 68, part 2−27
± 30 g at 11 ms duration;
5 shocks in each direction
1) The component is intended for industrial use.
Further technical specifications concerning the SPC200 can
be found in the System Manual for the SPC200 type
P.BE−SPC200−... or in the relevant supplementary description.