Install the gsd file and the bitmap file – Festo Кабели и принадлежности User Manual
Page 59
4. Commissioning
4−13
Festo P.BE−SPC200−COM−PDP−E N en 0901c
Please note
Various configuration programs are available for use in
conjunction with a Siemens master. Please observe the
relevant procedure for your configuration program.
Install the GSD file and the bitmap file
Depending on the configuration program used, install the
GSD file and the bitmap file with the aid of the appropriate
menu command or copy the files manually into a particular
directory of your programmr/PC.
With the STEP 7 V5.1 hardware configurator you can load the
files with the aid of the menu command [Extras] [. . .Install
new GSD] into the dialogue window [HW Config.].
Configuration
program
File type
Directory
STEP 7 V5.1 hardware
configurator
1)
GSD file
...\STEP7\S7DATA\GSD
configurator
1)
Bitmap files
...\STEP7\S7DATA\NSBMP
1)
If you copy the GSD files when the Simatic Manager has already been started, you can update the
hardware catalogue with the command [Extras] [Update GSD file].