Festo Кабели и принадлежности - Manual (Page 28)

1. System summary
1−10
Festo P.BE−SPC200−COM−PDP−E N en 0901c
1.5.1 I/O signals
Depending on the operating mode used, the field bus module
provides the following I/O bits for controlling the SPC200:
Operating mode I/O signals
Start/Stop I10.0 ... I13.15 *)
Q10.0 ... Q13.15 *)
Record Select I10.0 ... I11.15 *)
Q10.0 ... Q10.15 *)
*) Address assignment from the point of view of the SPC200
Please note
Outputs of the master are mapped on internal inputs;
internal outputs of the field bus module are mapped on
inputs of the master.