Festo Кабели и принадлежности - Manual (Page 16)

Contents and general instructions
XIV
Festo P.BE−SPC200−COM−PDP−E N en 0901c
Notes on the use of this manual
The following Festo manuals are necessary for the complete
documentation of the modular valve terminal, depending on
what you have ordered and on the further equipment for your
complete system:
Type Title Contents
System manual SPC200 Smart Positioning Controller
type P.BE−SPC200−... Installation, commissioning and
diagnosis with SPC200; standard
components and modules
Software manual Software package WinPISA
type P.SW−WIN−PISA−... Functions of the WinPISA software
package
Help system Help system for WinPISA
(contained in WinPISA) WinPISA help system
Manuals Field bus module
type P.BE−SPC−COM... Installation, commissioning and
diagnosis of the relevant field bus
module
Stepping motor module
type P.BE−SPC−SMX−1−... Installation, commissioning and
diagnosis when used with a stepping
motor
Fig. 0/2: Manuals on the SPC200
Special information on commissioning, programming and
diagnosing the SPC200 with the WinPISA software package
can be found in the appropriate manual for WinPISA. InformaĆ
tion on the pneumatic components can be found in the operĆ
ating instructions supplied with the product.