Festo Кабели и принадлежности - Manual (Page 56)

4. Commissioning
4−10
Festo P.BE−SPC200−COM−PDP−E N en 0901c
4.2.2 Setting the PROFIBUS address of the SPC200 with WinPISA
In order to set the PROFIBUS address of the SPC200 with
WinPISA, proceed as follows:
1. Read out the hardware configuration from the SPC200 or
set the hardware configuration manually, as described in
the guidelines in the WinPISA manual.
2. Double−click the symbol CPU−.. in the project window.
The dialogue window SPC200 configuration" will then
appear.
1
1
Field bus module for PROFIBUS
Fig. 4/3: Configuration of the SPC200 modules
3. Now select the register card Field bus.