Allied Telesis AT-S47 - Manual (Page 83)

AT-S47 Management Software User’s Guide
83
Module
Commands
SET LOCAL PORT
set local port=port|all mode=active|shutdown
Disables the laser on a GBIC port.
SET REMOTE PORT
set remote port=port|all mode=active|shutdown
Prevents a GBIC port from transmitting traffic through a multiplexing
port.
SHOW MODULE
show module=module|all
Displays status information on the selected module.
SET MODULE NAME
set module=number name=”name”
Assigns a name to a port or module.
SHOW GBIC MODULE
show gbic module=number|all
Displays status information on the selected GBIC module.
SHOW GBIC VENDOR MODULE
show gbic vendor module=number|all
Displays vendor information of where the selected module came from.
Link Test
Commands
ENABLE MODULE LINKTEST
enable module number=9|10|all linktest
Activates Link Test on a multiplexing port.
DISABLE MODULE LINKTEST
disable module number=9|10|all linktest
Deactivates Link Test on a multiplexing port.