Allied Telesis AT-S47 - Manual (Page 143)

AT-S47 Management Software User’s Guide
143
SET LOADER PASSWORD
Syntax
set loader password=password
Parameter
password Specifies the new loader password. The password
can be from 1 to 20 alphanumeric characters. The
default is “ATS47”.
Description
This command modifies the loader password. This password is used
when downloading new software onto the multiplexer using TFTP.
The management software uses the loader password to prevent you
from downloading an inappropriate file onto the AT-WDM02
Management Module. You must include the Loader Password in your
TFTP command. For instructions on how to download the AT-S47
Management Software using TFTP, refer to Using TFTP to Upgrade the
Management Software on page 75.
Example
The following command changes the loader password to “ABC56”:
set loader password=ABC56