Allied Telesis AT-S47 - Manual (Page 132)

Section III: Command Line Interface
132
SET PASSWORD
Syntax
set password
Parameters
None.
Description
This command is used to assign a new password to the AT-S47
management interface. You will be prompted to enter the password
whenever you start a local or Telnet management session. The password
can be from 1 to 20 alphanumeric characters. The password is case-
sensitive. The default is no password.
Example
set password
After entering the command, follow the prompts to assign a new
interface password. To delete a password without assigning a new
password, press Enter when prompted for the new password.