Allied Telesis AT-S47 - Manual (Page 118)

Section III: Command Line Interface
118
SHOW GBIC VENDOR MODULE
Syntax
show gbic vendor module=number|all
Parameter
module Specifies the GBIC port number whose vendor
information you want to view. The number can be
from 1 to 8. You can specify more than one port at
a time. You can specify the ports individually (e.g.,
2,3,5), as a range (e.g., 6-8), or both (e.g., 2,4,6-8).
To view all ports, use ALL.
Description
This command is used to display the vendor information of the GBIC
modules in the GBIC slots of the multiplexer. The type of vendor
information that you can display includes:
❑ Vendor name
❑ Vendor IEEE company ID
❑ Vendor part, revision, and serial numbers
❑ Vendor date code
Examples
The following command displays vendor information for the GBIC
module in Ch3:
show gbic vendor module=3