Allied Telesis AT-S47 - Manual (Page 21)

AT-S47 Management Software User’s Guide
21
The Run window is displayed in Figure 4.
Figure 4 Run Window
2. Type telnet in the Open text box.
3. Select OK.
The Telnet window is displayed in Figure 5.
Figure 5 Telnet Window
4. Type open, then press the Enter key.
The following prompt is displayed:
< to > _
5. Enter the IP address of the multiplexer you wish to connect to and
press the Enter key.
Once the IP address information is validated and confirmed, the
connection to the multiplexer is activated.
6. If a password has been assigned to the management software, enter
the password. The default is no password.
The AT-S47 Main Menu is displayed in Figure 2 on page 16.