Allied Telesis AT-S47 - Manual (Page 111)

111
Chapter 12
Module Commands
The commands in this section display status information about the ports
and modules in the multiplexer. You can also use the commands to
disable or enable a GBIC.
This chapter contains the following commands:
Command Function Page
SET LOCAL PORT Disables the laser on a GBIC port. 112
SET REMOTE PORT Prevents a GBIC module from
sending traffic through a
multiplexing port. 113
SHOW MODULE Displays status information on the
selected module. 115
SET MODULE NAME Assigns a name to a port or module. 116
SHOW GBIC MODULE Displays status information on the
selected GBIC module. 117
SHOW GBIC VENDOR
MODULE Displays vendor information of
where the selected module came
from. 118