Allied Telesis AT-S47 - Manual (Page 53)

AT-S47 Management Software User’s Guide
53
The fields in the Module Configuration menu for the management
module are defined in the table below:
3. Return to the Module Status Menu.
Power Supply
Module Settings
To configure the settings of the main Redundant Power Supply (RPS A)
or the optional Redundant Power Supply (RPS B) module, perform the
following procedure:
1. From the Module Status Menu, use the arrow keys on the keyboard to
select the RPS module whose settings you wish to configure.
2. Press the Enter key.
The Module Configuration menu for a power supply module is
displayed in Figure 24.
Figure 24 Module Configuration Menu - Power Supply Module
The fields in the Module Configuration menu for a power supply
module are defined in the table below:
Parameter Description
Port - Link Indicates the transmitting status of the 10Base-T port on
the management module.
• Online: Indicates that the 10Base-T port has
established a link with its end node.
• Offline: Indicates that the 10Base-T port is not being
used or has not established a link with its end node.
Module name Specifies the name for the management module. The
module name can be up to 20 alphanumeric characters
in length.
Parameter Description
Status Displays the status of the power supply module. The
available settings are:
• On
• Off
Module 12 - AT-WRPS A
Status On
Module name
Return to Module Status Menu...