Allied Telesis AT-S47 - Manual (Page 41)

AT-S47 Management Software User’s Guide
41
To run the diagnostic tests, perform the following procedure:
1. From the Main Menu, select Administration. The Administration Menu
is displayed in Figure 18.
Figure 18 Administration Menu
2. From the Administration Menu, select Diagnostics.
The diagnostic tests take only a few seconds to complete. The
results are listed in the Diagnostics window in Figure 19.
Figure 19 Diagnostics Window
Administration Menu
XModem software update to the WDM02
Ping a remote system
Syslog Server address: Null (not configured)
Syslog facility code: 1
Activity monitor
> Start log
Stop log
Diagnostics
Reset and restart the WDM02
Return to Main Menu ...
Allied Telesyn Gigabit Ethernet Wavelength Division Multiplexer
MAC Address 009099 79B1D5
AT-S47 Management Module Software: Version 1.0.0 B07 030324
WDM Chassis: WD1008 Revision 1
Running 3 hours, 15 minutes, 24 seconds
Diagnostic Results:
Flash PROM Good +5V Voltage(Chassis): + 5.14V
RAM Good +3.3V Voltage(Chassis): + 3.35V
Serial Interface Good +5V Voltage(MGMT Module): + 5.18V
RPS A On Temperature(Chassis): + 34.0 C
RPS B Off Temperature(MGMT Module): + 44.0 C
Fan 1 Good Fan 1 Speed: +3750rpm
Fan 2 Good Fan 2 Speed: +3750rpm
Hit any key to continue ...