Allied Telesis AT-S47 - Manual (Page 31)

AT-S47 Management Software User’s Guide
31
The traps are defined in the table below:
Table 1 SNMP Traps
4. After you have adjusted the trap settings, return to the Main
Menu.
SNMP Trap Description
Cold Start Transmitted whenever the multiplexer is power
cycled.
Authentication
Transmitted whenever an SNMP application
program attempts to perform a Set function, and
the Set community string on an SNMP application
program is different from the same community
string on the multiplexer.
Change Port Link Transmitted whenever a multiplexing port or a GBIC
port establishes or loses a link with its respective
end node.
Port
Active/Shutdown Transmitted whenever a GBIC port is manually
activated or deactivated.
Link Test Transmitted whenever the Link Test mode is
activated on one of the multiplexing ports.
Module
Insertion/Removal
Transmitted whenever a GBIC module is inserted or
removed from its slot.
RPS Failure Transmitted whenever a power failure occurs in the
main power supply or in the RPS module.
Fan Failure Transmitted whenever a failure occurs in the fan
module.
Over-Temperature Transmitted whenever the operating temperature
of the multiplexer exceeds 50
° C and/or the
operating temperature of AT-WDM02 Management
Module exceeds 63
° C.