Allied Telesis AT-S47 - Manual (Page 125)

125
Chapter 15
Activity Log Commands
This section describes the commands that control the Activity Log. The
Activity Log contains a list of multiplexer operating events, such as the
removal of a GBIC module or the loss of a data link. This log can be useful
in monitoring the operation of the unit and when troubleshooting any
problems. For a list of the events and their definitions, refer to Appendix
B, AT-WDM02 Activity Log Events on page 146.
This chapter contains the following commands:
Command Function Page
SHOW LOG Displays the Activity Log. 126
ENABLE LOG Activates the Activity Log so that
the multiplexer can store events in
the log. 127
DISABLE LOG Deactivates the Activity Log so that
the multiplexer cannot store events
in the log. 128
SET LOG Specifies a syslog server to which to
transmit the Activity Log events. 129