HP StoreAll Storage - Manual (Page 256)

for more information.) Then enter the target file system. Optionally, you can also specify a target
directory in the file system.
For replications to the same cluster and different file system, the Target Settings window asks for
the target file system. Optionally, you can also specify a target directory in the file system.
For replications to the same cluster and file system, the Target Settings window asks only for the
target directory. This field is required.
Specifying a target directory
Specifying a target directory is optional for remote cluster and same cluster/different file system
replications. It is required for same cluster/same file system replications. For example, you could
configure the following replication, which does not include a target directory:
•
Source directory: /srcFS/a/b/c
•
Exported file system and directory on target: /destFS/1/2/3
The contents of /srcFS/a/b/c are replicated to destFs/1/2/3/{contents_under_c}.
If you also specify the target directory a/b/c, the replication goes to /destFs/1/2/3/a/b/
c{contents_under_c}
.
IMPORTANT: If you specify a target directory, be sure that it does not overlap with a previous
replication using the same target export.
Click Next when finished. The Summary window appears.
Summary
Review the information you entered for the replication task. Click Finish if no further changes are
needed.
Viewing replication tasks
To view replication tasks for a particular file system, select that file system on the GUI and then
select Active Tasks > Remote Replication in the lower Navigator. The Remote Replication Tasks
bottom panel lists any replication tasks currently running or paused on the file system. The information
256 Using continuous remote replication