HP StoreAll Storage - Manual (Page 120)

•
Enter a name for the FTP share.
•
Enter the path to the file system or directory that will be shared (for example, /myFS1).
•
Optionally, enter details that describe the share.
NOTE: StoreAll software does not create the subdirectory if it does not exist, and for
anonymous shares only, adds a /pub/ directory to the share path instead. All files uploaded
through the anonymous user will then be placed in that directory. The /pub/ directory is not
created for a non-anonymous share.
Click Next to continue.
3. On the Config Profile window, do the following:
•
In the Select Profile box, select an existing configuration or select Create a new FTP Profile.
•
If you selected Create a new FTP Profile, you must enter a name in the Profile Name box.
•
In the Max Clients box, specify the maximum number of simultaneous connections from
different clients allowed on a single node (an FTP server).
•
In the Active Mode Enabled box, select true or false to enable or disable, respectively,
the active FTP connection mode.
•
In the Passive Mode Enabled box, select true or false to enable or disable, respectively,
the passive FTP connection mode.
•
If the passive FTP connection mode is enabled, enter the minimum port number the FTP
server will use.
•
If the passive FTP connection mode is enabled, enter the maximum port number the FTP
server will use.
Click Next to continue.
120 Using FTP