HP StoreAll Storage - Manual (Page 179)

3. On the Config Profile window, do the following:
•
Select an existing profile or select Create a new HTTP Profile. If you select the latter, enter
a name for this configuration profile. The name must be unique in the cluster.
•
In the Port box, enter the non-SSL ports that will be listened on for HTTP requests. Use
commas to separate the ports. The default port is 80.
•
In the SSL Port box, enter the SSL ports that will be listened on for HTTPS requests. Use
commas to separate the ports. The default SSL port is 443.
•
In the Max Clients box, specify the maximum number of simultaneous connections that
will be allowed from different clients. The default is 256.
•
In the Enable Keep-Alive box, select true or false to specify whether persistent connections
will be allowed. The default is to allow the connections (true).
•
If persistent connections are allowed, enter the timeout period for these connections in
the Keep-Alive Time-Out box. The default is 5.
Click Next to continue.
Creating HTTP shares from the HP StoreAll Management Console 179