HP P6000 Continuous Access Software - Manual (Page 236)

Considerations
•
You can use the GUI, CLUI, or jobs to set the DR protocol. See Storage systems actions cross
reference .
Procedure
1. In the navigation pane, select Storage Systems.
2. On the List tab, select the storage system on which you want to change the protocol.
3. Select Actions > Set DR Protocol Type.
The Set DR Protocol window opens.
4. Select the desired DR protocol type.
5. Click Apply.
Viewing storage systems
Display storage system list and tree views. See Storage systems views .
Considerations
•
You can use the GUI or CLUI. See Storage systems actions cross reference .
•
Tree views are available only in the GUI.
Procedures
This procedure uses the GUI.
1. In the navigation pane, select Storage Systems. The content pane displays storage system.
2. Click the List tab. A tabular list of storage systems is displayed.
3. Click the Tree tab. A graphical tree of storage systems, their disk groups, and virtual disks is
displayed. Click View to select another tree view.
Viewing storage system properties
View the properties of a specific storage system. See Storage systems properties summary .
Considerations
•
You can use the GUI or CLUI. See Storage systems actions cross reference .
Procedure
This procedure uses the GUI.
1. In the navigation pane, select Storage Systems.
2. On the List tab, select the storage system to view.
3. Select Actions > View Properties. The Storage System Properties window opens.
4. Click the properties tabs.
Storage system concepts
Replication licenses overview
To use local and remote replication features on a given array, the replication manager verifies
that appropriate HP replication licenses exist for that array.
•
For information on acquiring and installing local replication licenses, see the HP P6000
Replication Solutions Manager Administrator Guide.
•
For information on acquiring and installing remote replication licenses, see the HP P6000
Replication Solutions Manager Implementation Guide.
236 Storage systems