HP P6000 Continuous Access Software - Manual (Page 166)

Procedure
1. In the navigation pane, select Jobs to display the Jobs window in the content pane.
2. Click the Schedule tab.
The Schedule tab shows the list of scheduled job events.
3. Select the scheduled job event to remove.
4. Select Actions > Remove.
The Confirm Action window opens.
5. Click OK.
The scheduled event is removed from the list.
Viewing scheduled job events
A scheduled job event can be enabled or disabled. When enabled, the job is automatically run
at the scheduled interval and start time.
When disabled, the job event remains in the list of scheduled events but is not automatically run.
Procedure
1. In the navigation pane, select Jobs to display the Jobs window in the content pane.
2. Click the Schedule tab.
The Schedule tab shows the list of scheduled job events.
3. Select the scheduled job event.
4. Select Actions > View Properties.
The Job Schedule Properties window opens and displays the scheduled job event description.
5. Click OK to close the window.
Validating jobs
Validate a job to check resource availability before the job begins executing. See jobs Validation .
Considerations
•
You can use the GUI or CLUI. See Job actions cross reference .
Procedures
Validating a job from the GUI
1. In the navigation pane, select Jobs to display the Jobs window in the content pane.
2. Click the List tab.
3. Select the job to validate.
4. Select Actions > Run.
The Confirm Run Job window opens.
5. Select Validate.
6. Click OK.
Validating a job from the CLUI
1. Open a CLUI window.
2. Issue a Set Job command. Include the job name, mode switch, and run switch. The mode
switch should be validate.
166 Jobs