HP Network Storage Router m2402 - Manual (Page 80)

Visual Manager User Interface
86 Network Storage Router M2402 User Guide
Override Settings dialog box settings:
■ Port Name High sets a new value for the World Wide Port Name High.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. HP recommends backing up the router configuration
to an external file before making changes to this setting.
■ Port Name Low sets a new value for the World Wide Port Name Low.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. HP recommends backing up the router configuration
to an external file before making changes to this setting.
Note: If set incorrectly and the router is plugged into a Loop or Fabric, the unit may
receive Framing errors due to the incorrect Fibre Channel link speed.
■ Initiator Bit toggles between Set and Clear.
When using the router in a router-to-router configuration, this option
should be configured to Set. A router-to-router configuration is a type of
configuration where one router appears as a target to another initiator
router.
■ Link Garbage Deletion toggles between Enabled and Disabled.
■ Hi-Sup Bit toggles between Set and Clear.