HP Network Storage Router m2402 - Manual (Page 49)

Configuration Overview
55 Network Storage Router M2402 User Guide
UI Overview
The router supports the following user interfaces:
■ Visual Manager
■ Serial/Telnet
■ FTP
Each UI is introduced in the following paragraphs.
Visual Manager
Visual Manager allows any standard web browser to view and change router
configuration. Information is dynamically generated in an HTML format so that
any web browser can access it.
Unless the default values are used, the 10/100BaseT Ethernet port must be
configured using the serial port with an appropriate IP address, subnet mask, and
gateway prior to use.
For complete information on accessing and using Visual Manager, see Chapter 4 ,
“Visual Manager User Interface.”
Serial/Telnet
The serial port allows for configuration of device characteristics from a terminal
or terminal emulator. Multiple serial connections cannot be run at the same time.
From most Windows 9x, Windows NT, and Windows 2000 systems, users can
start a Telnet session from the DOS (Command) shell.
For complete information on accessing and using the Serial/Telnet UI, see
Chapter 5 , “Serial/Telnet User Interface.”
FTP
The router supports the use of the FTP UI to perform several copy procedures
using the “
put ” and the “ get ” commands.
For more information, see Chapter 6 , “FTP User Interface.”