HP Network Storage Router m2402 User Manual

Page 121

Serial/Telnet User Interface

127

Network Storage Router M2402 User Guide

Note:

To use the DHCP feature, a DHCP server must be operational on the Ethernet

network. If the DHCP feature is used when there is no DHCP server, DHCP standards

require the router wait three minutes for a response from a DHCP server before timing

out.

■

Change SNMP Settings (8) (SNMP is not supported)

Note:

Be sure to correctly set the clock and date in the Real Time Clock configuration

menu so that even logging is accurate.

■

Change Security Settings (9) changes security settings, including the user
name and password.

The default user name is

root

and the default password is

password

Caution:

To ensure security, change the user name and password from the

default settings.

Note:

The security settings entered here affect all user interfaces.

User names and passwords should be unique and kept confidential. HP
recommends using a combination of letters and numbers when creating user
names and passwords.