HP Network Storage Router m2402 - Manual (Page 111)

117 Network Storage Router M2402 User Guide
5
Serial/Telnet User Interface
The Serial/Telnet User Interface (UI) is used to configure and manage the HP
StorageWorks Network Storage Router M2402. This chapter describes the
configuration menus and option tasks available in the Serial/Telnet UI.
Note: Unless otherwise indicated, configuration changes take effect when the router
reboots.
During the start up process of the router, the Serial/Telnet UI displays initial
power-up messages. After the power-up process is completed, the main menu of
the UI is displayed. Within the router main menu, several configuration menus and
tasks are listed. All configuration and management tasks are performed from these
menus.
This chapter is organized using the same structure as the router main menu and its
associated sub-menus. The sections are:
■ Telnet UI Access , page 119
■ Serial UI Access , page 120
■ Power up Messages , page 120
■ Serial/Telnet UI Main Menu , page 121
■ Configuration Menu , page 122
■ Baud Rate Configuration , page 124
■ Ethernet Configuration , page 125
■ World Wide Node Name Configuration , page 128
■ Modules Configuration , page 129
— Configuring Fibre Channel modules
— Configuring SCSI modules