HP Network Storage Router m2402 - Manual (Page 172)

Serial/Telnet User Interface
178 Network Storage Router M2402 User Guide
Saving Copies of the Trace Buffers using FTP
Using an FTP session, the trace buffers from the router can be copied and saved.
1. Verify the router is connected to the Ethernet network.
2. Start an FTP session.
3. At the FTP prompt, enter the router IP address:
ftp
Note: Initially, the factory default router IP address is 1.1.1.1. To view the current IP
address, navigate to the Ethernet Configuration Menu and view the screen display.
See the “Configuration Menu” section for information on viewing and changing the
router IP address.
4. Specify the directory location on the computer or network where the FTP
program will store the trace file.
5. Enter the user name and password.
The factory default user name is root and the default password is password.
6. Specify Bin mode:
bin
7. To copy the current trace buffer:
get curtrace.txt
The file will transfer from the router.
8. To copy the previous trace buffer:
get prvtrace.txt
The file will transfer from the router.