HP Network Storage Router m2402 - Manual (Page 124)

Serial/Telnet User Interface
130 Network Storage Router M2402 User Guide
Configuring Fibre Channel Modules
When a Fibre Channel module is selected, the Fibre Channel Configuration Menu
is displayed. The Fibre Channel Configuration Menu allows the user to configure
the Fibre Channel Address method, Hard Address value, discovery mode, WWN
overrides, tape backup settings, default map value, and Fibre Channel port mode
(see
Figure 73 ).
Figure 73: Fibre Channel Configuration menu
Fibre Channel Configuration Menu options:
■ Change Port Name High (1) changes the World Wide Port Name High.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
■ Change Port Name Low (2) changes the World Wide Port Name Low.