HP Network Storage Router m2402 - Manual (Page 36)

Installation
42 Network Storage Router M2402 User Guide
Connecting the Power Cord
WARNING: This product can ONLY be used with an HP approved power
cord for your specific geographic region. Use of a non-HP approved power
cord may result in:
■
Not meeting individual country specific safety requirements;
■
Insufficient conductor ampacity that could result in overheating with
potential personal injury and/or property damage; and
■
An unapproved power cord could fracture resulting in the internal
contacts being exposed, which potentially could subject the user to a
shock hazard.
HP disclaims all liability in the event a non-HP approved power cord is used.
The internal power supply will support 100 - 240 VAC (Auto Sensing). The
power cord shipped with the router is a 120 VAC three-conductor power cord for
use in the United States and Canada. If the router is being installed outside the
United States or Canada, the appropriate power cord must be purchased.
WARNING: To reduce the risk of electric shock or damage to the
equipment:
■
Do not disable the power-cord grounding-plug. The grounding plug is an
important safety feature.
■
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
■
Disconnect power from the router by unplugging the power cord from
either the electrical outlet or the router.