HP Network Storage Router m2402 - Manual (Page 64)

Visual Manager User Interface
70 Network Storage Router M2402 User Guide
■ Power Supply configuration configures the number of power supplies.
■ Reset menu restores factory default settings.
Each menu option is discussed in the following paragraphs.
Serial Configuration
The Serial screen is used to change the baud rate for the serial port
(see
Figure 32 ).
If the Autobaud feature is being used, it may not be necessary to set the baud rate.
Figure 32: Serial screen
The current baud-rate setting is displayed. HP recommends setting this value to
115200.