HP Network Storage Router m2402 - Manual (Page 154)

Serial/Telnet User Interface
160 Network Storage Router M2402 User Guide
Configuring Event Settings
In the Utility Trace Settings Menu, Event Settings Configuration (2) is used to
modify event filters.
The following Event Filter Settings screen is displayed:
Figure 97: Event filter settings
Note: The asterisk in the screen display denotes the current setting.
1. To change any of the settings in this screen, enter the number of the desired
setting (1, 2, 3, or 4) that corresponds to the option that needs to be changed.
Settings include:
■ 1) Log All Events
■ 2) Disable Event Logging
■ 3) Error Events
■ 4) Notify Events
2. Before leaving the page, activate the new setting by entering Update Current
Operating Trace levels (U). This option forces the currently displayed trace
settings to become effective immediately, without requiring a reboot or power
cycle.
Note: Set the clock and date in the Real-Time Clock Configuration menu so that event
logging is accurate.