HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 8)

Introduction 8
Command Changes Virtual Connect 4.10 Virtual Connect 4.20
add port-monitor
remove port-monitor
set port-monitor
Modified the
commands to include
QSFP+ uplink ports in
the AnalyzerPort
property
add port-monitor
[AnalyzerPort=
tID>]
[Speed=
100Mb|1Gb|10Gb|Dis
abled>]
[Duplex=
|Full>]
[MonitorPort=
ID>]
[Direction=
er|FromServer|Both
>]
where the format of the
network analyzer
is
:
erconnectBay>:
tNumber>
add port-monitor
[AnalyzerPort=
tID>]
[Speed=
100Mb|1Gb|10Gb|40G
b|Disabled>]
[Duplex=
|Full>]
[MonitorPort=
ID>]
[Direction=
er|FromServer|Both
>]
where the format of the
network analyzer
is
:
erconnectBay>:
tNumber>.
For QSFP+ ports, the
format is
Q..
add port-monitor
set port-monitor
add uplinkport
set uplinkport
Modified the
commands to include
the "40Gb" speed
type
[Speed=
100Mb|1Gb|10Gb|Dis
abled>]
[Speed=
100Mb|1Gb|10Gb|40G
b|Disabled>]
show config The
includePoolInfo
option provides
VC-defined
addresses and
user-defined
addresses for
profiles, to be used to
restore the profiles
while maintaining the
pool-specified IDs.
Not available Available
add profile
add enet-connection
add fc-connection
add fcoe-connection
add iscsi-connection
The
PoolSpecified
option supports
creating a profile and
its connections with
pool-specified
addresses, if
available in the
specified domain
pool.
Not available Available
show interconnect The
-fip_snooping
option displays FIP
snooping information
for the specified
interconnect module.
Not available Available