HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 126)

Command line 126
• Priority-based Flow Control (PFC)
• Application Protocol (AP)
The following table lists the type of DCBX statistics displayed.
Item Description
DCBX Application Protocol State
DCBX Overall Status
DCBX Pending Status
DCBX Priority Flow Control State
DCBX Priority Group State
DCBX Application Protocol State
The following table defines each statistic.
Item Description
disabled
The feature is operationally disabled.
ok The feature is configured properly or DCBX negotiation is in progress.
incompatible cnfg A FlexFabric network adapter has an incompatible configuration and is not
accepting changes.
peer_disabled A FlexFabric network adapter reports that the feature is not enabled.
Does not support dcbx A FlexFabric network adapter does not indicate that it supports the feature.
Not advertising dcbx support A FlexFabric network adapter is not running DCBX within the expired
period.
Error during cnfg A FlexFabric network adapter reported an error configuring the feature.
Not accepting changes A FlexFabric network adapter reported an error configuring the feature.
statistics-throughput
Manage the port throughput statistics.
Supported actions: help, show, set
Item Description
show statistics-
throughput
Display throughput information for the specified physical port, FlexNIC, and the
aggregated throughput information for the specified LAG.
Syntax
show statistics-throughput
[LAGID=]
Parameters
PortID (optional) The port ID of the port/subport for which to display throughput information. PortID is
composed of
::[:]. For
QSFP+ ports, the format is Q.. Port throughput collection must
be enabled for the domain by issuing the set statistics-throughput
command. A column that contains an "R" indicates that the statistics were reset by the
user during that time period; therefore, the throughput is not available for that time
period.
config (required
if PortID is not
specified)
Displays the current configuration of throughput statistics