HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 21)

Command line 21
Item Description
set auto-deployment This command enables customization of options related to auto-deployment,
such as choosing to use DHCP to discover a TFTP server location or to manually
specify TFTP settings to use for the configuration script location used for
deployment.
Syntax
set auto-deployment TftpMode=
[TftpServer= TftpFile=
Examples
->set auto-deployment TftpMode=Manual
TftpServer=192.168.1.1
TftpFile=myconfig.script
Use a specified TFTP server as the configuration script source used for
deployment
->set auto-deployment TftpMode=Auto
Use DHCP for automatic discovery of the configuration script source
Item Description
show auto-deployment This command displays properties related to auto-deployment. This includes the
current status, deployment log, the configuration script used for deployment,
and the command output generated from the configuration of the domain during
deployment.
Syntax
show auto-deployment [[status] [log] [config] [output]]
Examples
->show auto-deployment
->show auto-deployment status
Display the status of auto-deployment along with its settings
->show auto-deployment log
Display the deployment log
->show auto-deployment config
Display the configuration script used in the deployment
->show auto-deployment output
Display the output generated from executing the configuration script
Item Description
start auto-deployment This command initiates the auto-deployment process. During deployment,
servers are powered off, the domain is cleared, and the configuration is
deployed using the configuration script downloaded from the remote TFTP
server. This command might cause the current user session to log out during the
deployment process.
Syntax
start auto-deployment
Examples
->start auto-deployment
Starts a new deployment process
Item Description
stop auto-deployment Stop a deployment operation that is in progress.
Syntax
stop auto-deployment