HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 44)

Command line 44
Item Description
Syntax
set fc-connection
[Fabric=]
[Speed=]
[BootPriority=] [BootPort=]
[BootLun=]
Parameters
ProfileName (required) The name of the server profile containing the connection to modify
Port (required)
The port number of the connection being modified
Properties
Fabric (optional) The name of the FC SAN fabric associated with the connection. Associate the
specified fabric with the same bay as the FC connection. A blank string makes
the FC connection unassigned.
Speed (optional) The port speed of the FC SAN connection. Values include "Auto", "8Gb",
"4Gb", "2Gb", "1Gb", and "Disabled".
Speed restrictions:
For the HP VC 4Gb FC Module, supported speed values include
"Auto","1Gb","2Gb", "4Gb", and "Disabled". If the value is set to 8Gb, the
speed is auto-negotiated by VC.
BootPriority
(optional)
Controls whether the FC HBA port is enabled for SAN boot and affects the BIOS
boot order. Values include "BIOS", "Primary", "Secondary", and "Disabled".
BootPort
(Required if the Boot Priority is
either Primary or Secondary,
otherwise optional)
The target WWPN of the controller interface on the Fibre Channel storage
target. The port name is a 64-bit identifier in the format
NN:NN:NN:NN:NN:NN:NN:NN, where N is a hexadecimal number.
BootLun
(Required if the Boot Priority is
either Primary or Secondary,
otherwise optional)
The LUN of the volume used for SAN boot. Values include integers from 0 to
255 or 16 hex digits (HP-UX only).
Examples
->set fc-connection MyProfile 1 Fabric=SAN_5
Changes the fabric of an FC SAN fabric connection
->set fc-connection RedProfile 2 Fabric=""
Sets an FC SAN fabric connection to "Unassigned"
->set fc-connection BlueProfile 1 Fabric=SAN_7
Changes the FC SAN fabric of an FC SAN connection
->set fc-connection BlueProfile 1 Speed=4Gb
Changes the port speed of an FC SAN connection
->set fc-connection BlueProfile 1 BootPriority=Primary
BootPort=50:06:0B:00:00:C2:62:00 BootLun=5
Changes the SAN boot priority and sets additional boot parameters
Item Description
show fc-connection Display the FC SAN connections associated with the server profiles.
Syntax
show fc-connection []
Parameter