HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 28)

Command line 28
Item Description
delete domain Delete the existing VC domain configuration.
Deleting the domain removes the entire VC domain configuration and resets it to the
original defaults. After the domain is deleted, you are logged out and the VCM
resets.
Syntax
delete domain [-quiet]
Option
quiet Suppresses user confirmation prompts. This option is useful when scripting delete
domain operations.
Examples
->delete domain
Deletes the VC domain configuration and prompts for user confirmation
->delete domain -quiet
Deletes the VC domain quietly without prompting for user confirmation (primarily
used in automated scripting scenarios)
Item Description
set domain Modify general VC domain configuration properties, such as the domain name,
domain IP address, and MAC and WWN address pool settings.
Syntax
set domain [Name=] [DomainIp=]
[IpAddress=] [SubnetMask=]
[Gateway=] [DomainIpv6=]
[Ipv6Address=/]
[Ipv6Gateway=]
[MacType=]
[MacPool=<1-64>] [MacStart=] [MacEnd=
address>] [WwnType=
User-Defined>] [WwnPool=<1-64>] [WwnStart=]
[WwnEnd=] [SingleDense=true|false]
Properties
Name(optional) The new name of the domain. Valid characters include alphanumeric, "_", and ".".
The maximum length of the name is 31 characters.
DomainIP (optional) Enables or disables the VC domain IP address. If enabled, a valid IP address and
subnet mask must be configured. If disabled, DHCP is used to obtain a valid IP
address.
Enabling domain IP address configuration or changing the domain IP address can
cause a temporary loss of connectivity to the VCM. Use caution when changing
these settings.
Values include "Enabled" and "Disabled".
IpAddress (Required
if DomainIP is
enabled)
A valid IP address to use for the domain IP address configuration. The IP address
must be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and 9, for
example, 192.168.0.10.
SubnetMask (Required
if IP address
specified)
A valid subnet mask for the domain IP address configuration. The subnet mask must
be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and 9, for
example, 255.255.255.0.
Gateway (Required if
IP address
specified)
A valid gateway address for the domain IP address configuration. The gateway
address must be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and
9, for example, 192.168.0.1.
DomainIpv6
(optional)
Enables or disables the VC domain IPv6 address. If enabled, you must configure a
valid IPv6 address.
Enabling a domain IPv6 address configuration or changing the domain IPv6
address can cause a temporary loss of connectivity to the VCM. Use caution when
changing these settings.