HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 118)

Command line 118
Item Description
SystemContact
(optional)
SNMP system contact information.
Enabled (optional) Enables or disables the SNMP agent. The default value is "true". Valid values
include "true" or "false".
SmisEnabled
(optional)
Enables or disables SMIS. This property is valid only for VC-FC modules. The default
value is "false". Valid values include "true" or "false".
Examples
->set snmp enet ReadCommunity=mydatacenter1
[email protected] Enabled=true
Enables the SNMP agent for VC-Enet modules and supplies a community string
->set snmp fc ReadCommunity=mydatacenter
SystemContact=FcAdmin Enabled=true
Enables the SNMP agent for VC-FC modules
Item Description
show snmp Display the SNMP configuration settings for the VC domain.
Syntax
show snmp [Type]
Parameter
Type (optional) Indicates the type of SNMP configuration to display. If the type is not specified, all
VC SNMP configuration information appears. Valid values include "Enet" and
"FC".
Examples
->show snmp Enet
Displays SNMP configuration for VC-Enet modules only
->show snmp FC
Displays SNMP configuration for VC-FC modules only
->show snmp
Displays SNMP configuration for all modules
ssh
Manage SSH configuration and information.
Supported actions: help, load, remove, show
Item Description
load ssh Transfer the SSH key from a remote FTP server and apply it to the VC domain. A
customized SSH key enables additional security for SSH clients that are allowed to
access the domain configuration. If a new custom SSH key is applied, the SSH clients
must be configured correctly to have access.
This command loads an SSH key for the current user only. Other VC users are not able
to use the same SSH key to authenticate. This command is only valid for local VC users
(no LDAP, TACACS+, or RADIUS users).
Syntax
load ssh Address=
-or-
load ssh Address=
Filename=
Properties
Address
(required)
The IP address or host name of an FTP server, with user name, password, and remote