HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 107)

Command line 107
Item Description
Syntax
set serverid Type=Factory-Default
set serverid Type=VC-Defined [PoolID=<1-64>]
set serverid Type=User-Defined Start=VCX01nnnnn
End=VCX01nnnnn
Properties
Type (required) The type of the virtual serial number source. When server profiles are created, the
UUID values are not allocated from the pool, the virtual serial number is allocated
from the pool; and the virtual UUID is randomly generated. Valid values include
"Factory-Defined" (default), "VC-Defined", and "User-Defined".
PoolID (optional) The VC-Defined Pool ID to be used. If not specified, the default Pool ID is 1. This
property is only valid for VC-Defined serial number types.
Start (required if
Type is
User-Defined)
The starting serial number in a user-defined range. This property is only valid for
User-Defined serial number types. User-Defined serial number ranges should start
with the pattern VCX01.
End (required if Type
is User-Defined)
The ending serial number in a user-defined range. This property is only valid for
User-Defined serial number types. User-Defined serial number ranges should start
with the pattern VCX01.
Examples
->set serverid Type=Factory-Default
Modifies virtual server ID settings to use factory default serial numbers
->set serverid Type=VC-Defined PoolId=5
Modifies virtual server ID settings to use VC-defined serial numbers
->set serverid Type=User-Defined Start=VCX0000001
End=VCX0100010
Modifies virtual server ID settings to use a custom, user-defined serial number range
Item Description
show serverid Display virtual server ID configuration properties.
Syntax
show serverid
Example
->show serverid
Displays virtual server ID configuration properties
session
Manage the session timeout value.
Supported actions: help, set, show
Item Description
set session Modify the session timeout value.
Syntax
set session Timeout=
Property
Timeout (required) Number of minutes from 10 to 1440 to expire idle sessions. Use "0" to disable
session timeout (user sessions never expire). The default value is 15 minutes. If the
Session Timeout value is lowered, currently inactive sessions can be removed.
Examples
->set session Timeout=20
Sets idle user sessions to expire after 20 minutes of inactivity