HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 117)

Command line 117
Item Description
Sets the trap community
->set snmp-trap MyTrap1 Severity=All FcCategories=None
EnetCategories=None
Sets all trap severities and sets the Fibre Channel and Ethernet categories to none
->set snmp-trap MyTrap
Address=fe80:0000:0000:0000:0202:b3ff:fe1e:8329
Sets a trap using an IPv6 address
Item Description
->show snmp-trap Displays the SNMP traps that have been configured.
Syntax
show snmp-trap [Name|*]
Parameter
Name (optional) The name of the trap configuration to be displayed. If no trap name is specified, or
"*" is entered, all configured traps are displayed.
Examples
->show snmp-trap MyTrap1
Displays the SNMP trap configuration for a single trap
->show snmp-trap *
Displays all configured SNMP traps
Item Description
->test snmp-trap Generates an SNMP test trap and sends it to all configured destinations.
Traps participating in the test must be configured, at a minimum, with the following
attributes:
DomainCategories=DomainStatus
Severity=Info
Syntax
test snmp-trap
Example
->test snmp-trap
Generates an SNMP test trap and sends it to the configured destinations
snmp
View and modify the SNMP configuration for VC-Enet and VC-FC modules, and add, modify, and remove
SNMP trap configurations related to trap destinations.
Supported actions: set, show, help
Item Description
set snmp Modify the VC SNMP configuration.
Syntax
set snmp [ReadCommunity=]
[SystemContact=] [Enabled=]
[SmisEnabled=]
Parameter
Type (required) Indicates which SNMP configuration to modify. Valid values include "Enet" and
"FC".
Properties
ReadCommunity
(optional)
Read-Only Community String for the SNMP configuration. The default value is
"public". If the type is "Enet", the maximum length of the read community string is
39 characters. If the type is FC, the maximum length is 12 characters.