HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 37)

Command line 37
Item Description
->show enet-vlan
Displays Ethernet VLAN configuration settings
external-manager
Manage external manager settings and information.
Supported actions: help, remove, set, show
Item Description
remove
external-manager
Remove an existing external manager (VCEM) and regain local management
profile control of the domain.
When releasing the profile control, you must specify values for each MacType,
WwnType, and ServerIdType.
IMPORTANT: You must set the external manager enabled to "false" using the set
external-manager command before using the remove external-manager
command.
Syntax
remove external-manager [-quiet] [UserName=]
[MacType=] [MacStart=
address>] [MacEnd=]
[WwnType=] [WwnStart=
address>] [WwnEnd=]
[ServerIdType=]
[ServerIdStart=] [ServerIdEnd=
address>]
Option
quiet This option suppresses user confirmation prompts and is useful when scripting
operations.
Properties
UserName (optional) A valid external manager user name. The user name can be identified using the
show external-manager command.
MacType (optional) The type of MAC address source to use for assignment. Valid values include
"Factory-Default" and "User-Defined".
MacStart (required
if the MacType is
User-Defined)
The starting MAC address in a custom user-defined range. This property is valid
only if the MacType is set to "User-Defined".
MacEnd (required if
the MacType is
User-Defined)
The ending MAC address in a custom user-defined range. This property is valid
only if the MacType is set to "User-Defined".
WwnType (optional) The type of WWN address source to use for assignment. Valid values include
"Factory-Default" and "User-Defined".
WwnStart (required
if the WwnType is
User-Defined)
The starting WWN address in a custom user-defined range
WwnEnd (required if
the WwnType is
User-Defined)
The ending WWN address in a custom user-defined range
ServerIdType
(optional)
The type of the virtual serial number source. When server profiles are created, the
virtual serial numbers and UUID values are allocated from the specified pool
source. Valid values include "Factory-Default" and "User-Defined".
ServerIdStart
(required if Type is
User-Defined)
The starting serial number in a user-defined range. This property is only valid for
user-defined serial number types.