HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 139)

Command line 139
Item Description
ContactInfo
(optional)
Contact information for the user
Enabled (optional) Enables or disables the user. Valid values are "true" and "false". If not specified,
the default is "true".
Roles (optional) The allowed roles for the user. Valid values are any combination of "domain",
"server", "network", or "storage" separated by commas. If no roles are specified,
the user can view domain information only. Use "*" to specify all roles.
Examples
->add user steve Password=fgY87hHl
Adds a new user by specifying the minimal amount of properties
->add user bill Password=HGtwf7272562 Roles="domain,network"
FullName="Bill Johnson" [email protected]
Enabled=true
Adds a new user and configures additional user properties
->add user Admin Password=hjkhfd Roles=*
Adds an Admin user with all roles
Item Description
remove user Remove a user from the Virtual Connect Manager database.
Syntax
remove user
Parameter
UserName (required) The name of an existing user to be removed. Use "*" to remove all users except for
the default Administrator account.
Examples
->remove user steve
Removes a specific user by name
->remove user *
Removes all users except the default Administrator account
Item Description
set user Modify attributes of an existing user.
Syntax
set user [] [FullName=]
[ContactInfo=] [Enabled=]
[Roles=]
Parameter
UserName (required) The name of the user to modify
Properties
Password (optional) The new password of the user can be entered as clear text in the command. If the
Password value is blank, you are prompted to enter the password, and the
characters entered are masked. When a domain is first created, the default
minimum length of a password is 8 characters. Virtual Connect allows a password
length between 3 and 40 characters. The password length can be adjusted using
the set user-security command.
FullName (optional) The full name of the user
ContactInfo
(optional)
Contact information for the user
Enabled (optional) Enables or disables the user. Valid values are "true" and "false". The default value
is "true".
Roles (optional) The allowed roles for the user. Valid values are any combination of "domain",
"server", "network", or "storage" separated by commas. If no roles are specified,