HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 40)

Command line 40
Item Description
PrefSpeed
(required if
PrefSpeedType is
"Custom")
The preferred connection speed for any FCoE connection attached to this fabric. Values
range from 100Mb to 8Gb in 100Mb increments. This property can be configured
only if the fabric has uplink ports from the FlexFabric interconnect module.
MaxSpeedType
(optional)
The maximum connection speed for any FCoE connection attached to this fabric.
Values are "Unrestricted" and "Custom". "Custom" allows the user to configure the
speed. The default value is "Unrestricted". This property can be configured only if the
fabric has uplink ports from the FlexFabric interconnect module.
MaxSpeed
(required if
MaxSpeedType is
"Custom")
The maximum connection speed for any FCoE connection attached to this fabric.
Values range from 100Mb to 8Gb in 100Mb increments. This property can be
configured only if the fabric has uplink ports from the FlexFabric interconnect module.
Examples
->add fabric MyFabric1 Bay=3 Ports=1,2
Adds a new FabricAttach fabric, using default values
->add fabric MyFabric5 Bay=3 Ports=1,2 Type=DirectAttach
Adds a new DirectAttach fabric
->add fabric MyFabric2 Bay=3 Ports=1 Speed=2Gb
Adds a new fabric with speed set to 2Gb
->add fabric MyFabric3 Bay=3 Ports=1,2,3,4 LinkDist=Auto
Adds a new fabric with automatic login re-distribution
->add fabric MyFabric4 Bay=3 Ports=1,2
Adds a new fabric with two logical ports
->add fabric MyFabric4 Bay=3 Ports=1,2 PrefSpeedType=Custom
PrefSpeed=4000 MaxSpeedType=Custom MaxSpeed=8000
Adds a new fabric with a preferred connection speed of 4Gb and maximum
connection speed of 8Gb
Item Description
remove fabric Remove an existing fabric from the domain.
Syntax
remove fabric
Parameter
Name (required) The name of a specific fabric. Use "*" to remove all existing fabrics.
Examples
->remove fabric VFabric_1
Removes VC FC SAN fabric VFabric_1
->remove fabric *
Removes all VC FC SAN fabrics from the domain
Item Description
set fabric Modify properties of an existing fabric or force load balancing of a fabric if login
re-distribution is configured.
Syntax
set fabric [-LoadBalance] [Name=]
[Ports=] [Speed=]
[LinkDist=][PrefSpeedType=]
[PrefSpeed=<100Mb-8Gb in 100Mb
steps>][MaxSpeedType=]
[MaxSpeed=<100Mb-8Gb in 100Mb steps
Parameter
Name (required) A unique name for the fabric
Option