HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 47)

Command line 47
Item Description
->add fcoe-connection MyNewProfile
WWNAddressType=Pool-Specified
PortWWN=50:06:0B:00:00:C2:62:00
NodeWWN=50:06:0B:00:00:C2:62:01
Adds a new FCoE connection and provides WWN addresses from the
VC-defined or user-defined pool
->add fcoe-connection MyNewProfile
MACAddressType=Factory-Default
Adds a new FCoE connection and uses factory-default MAC addresses
->add fcoe-connection MyNewProfile
MACAddressType=User-Defined
EthernetMAC=00-17-A4-77-00-00
Adds a new FCoE connection and provides a user-defined MAC address
->add fcoe-connection MyNewProfile
MACAddressType=Pool-Specified
EthernetMAC=00-17-A4-77-00-00
Adds a new FCoE connection and provides a MAC address from the
VC-defined or user-defined pool
->add fcoe-connection MyProfile Fabric=MyFabric
SpeedType=Preferred
Adds a new FCoE connection and sets the speed type to "Preferred"
->add fcoe-connection MyProfile Fabric=MyFabric
SpeedType=Preferred
Adds a new FCoE connection and set the speed type to "Preferred"
Item Description
remove fcoe-connection Remove the last FCoE connection from an existing server profile.
Syntax
remove fcoe-connection
Parameter
ProfileName (required) The name of an existing profile from which the last FCoE connection is being
removed
Example
->remove fcoe-connection MyProfile
Removes an FCoE connection from a profile
Item Description
set fcoe-connection Modify an existing FCoE connection.
Syntax
set fcoe-connection
[Fabric=|FcoeNetwork=]
[SpeedType=<1Gb|2Gb|4Gb|8Gb|Auto|Custom|Preferred|Disabl
ed>] [CustomSpeed=<100Mb-8Gb|20Gb>]
[BootPriority=] [BootPort=]
[BootLun=]
Parameters
ConnectionID
(required)
The ID of an existing FCoE connection. The format of the ID must be
.
Properties
Fabric (optional) The name of the fabric to associate with the connection. The fabric being
specified should be associated with the same bay as the FCoE connection.
FcoeNetwork (optional) The name of the FCoE network to associate with the connection. You cannot
specify both Fabric and FcoeNetwork properties.