HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 119)

Command line 119
Item Description
file containing the SSH keys to transfer.
Place brackets around the IPv6 address in the FTP URL.
Filename
(required)
The name of the remote file containing the SSH keys to transfer. The filename can also
be mentioned separately.
The file path given will be treated as relative to the login directory for the user on the FTP
server. The user should ensure that the permissions are appropriate for the transfer to
succeed.
Examples
->load ssh Address=ftp://user:[email protected]/
ssh_key.pub
Transfers the SSH key from the remote FTP server
->load ssh Address=ftp://user:[email protected]
Filename=/ssh_key.pub
Transfers the SSH key from the remote FTP server
->load ssh address=ftp://user:password@[2001:1::1]/ssh_key.pub
Transfers the SSH key from the remote FTP server using an IPv6 address
->load ssh address=ftp://user:password@[2001:1::1]
filename=/ssh_key.pub
Transfers the SSH key from the remote FTP server using an IPv6 address
Item Description
remove ssh Remove any custom SSH keys that have been applied.
Syntax
remove ssh
Example
->remove ssh
Removes SSH keys
Item Description
show ssh Display the SSH key configuration.
Syntax
show ssh
Example
->show ssh
Displays the SSH key configuration
ssl-certificate
View and upload the SSL certificate from a remote FTP server.
Supported actions: help, load, show
Item Description
load ssl-certificate Transfer an SSL certificate from a remote FTP server and apply it to the VCM
web server. After a new SSL certificate is applied, the web server resets.
When renewing certificates, the upload removes any previous Signed
Certificate from VCM. You must add a new certificate or update with a
renewed certificate in your browser. See browser Help for information on
installing or renewing certificates.
Syntax
load ssl-certificate
Address=