HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 14)

Introduction 14
Command output filtering
The CLI provides output filtering capabilities that enable you to display only properties of interest. This feature
is useful for filtering large amounts of output data for specific information. One or more properties can be
specified in the output filtering rules.
The following examples illustrate some common usage scenarios for output filtering:
Example 1: Displaying all enabled users
->show user enabled=true
Example 2: Displaying all VC Ethernet modules
->show interconnect type=VC-ENET
Example 3: Displaying all external uplinks that have a link established
->show uplinkport status=linked
Example 4: Displaying all uplink ports with connector type of RJ-45 and speed configured to Auto
->show uplinkport type=RJ45 Speed=Auto
Example 5: Displaying all servers currently powered on
->show server power=On
Command line overview
The VCM Command Line Interface can be used as an alternative method for administering the VCM. Using
the CLI can be useful in the following scenarios:
• You can develop tools that utilize VCM functions for data collection and for executing provisioning and
configuration tasks.
• When no browser is available or you prefer to use a command line interface, you can access
management data and perform configuration tasks.
• You can batch commands using script files. These script files can be run manually or scheduled to run
automatically.
Command line syntax
CLI input is case-insensitive, except when otherwise noted. The general CLI syntax format is as follows:
[] []
Item Description
subcommand Operation performed on a managed element
managed element Target management entity
parameters Command extensions for a particular management operation
options Attributes used to customize or control command execution behavior such as output
format, quiet-mode, and others
properties One or more name and value pairs that are accessories to the command operation,
mainly for set and add operations
Example: ->add user mark password=asdf89g fullname="Mark Smith" enabled=true