HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 163)

Command line 163
::= { connUnitPortStatEntry 7 }
BYTESTRANSMITTED
Object type
connUnitPortStatCountTxElements
Description
The number of octets or bytes transmitted by this port in 1-second periodic polling of the
port. This value is saved and compared with the next polled value to compute the net
throughput. For Fibre Channel, ordered sets are not included in the count.
::= { connUnitPortStatEntry 6 }
CLASS3DISCARDS
Object type
connUnitPortStatCountClass3Discards
Description The number of Class 3 frames discarded upon reception at this port. No FBSY or FRJT
is generated for Class 3 frames, and they are discarded if they cannot be delivered.
::= { connUnitPortStatEntry 28 }
CRCERRORS
Object type
connUnitPortStatCountInvalidCRC
Description The number of frames received with an invalid CRC. This count is part of FC-PH's LESB.
Loop ports should not count CRC errors passing through when monitoring.
::= { connUnitPortStatEntry 40 }
DELIMITERERRORS
Object type
connUnitPortStatCountDelimiterErrors
Description The number of invalid frame delimiters received at this port, for example, a frame with
a class 2 at the start and a class 3 at the end.
::= { connUnitPortStatEntry 49 }
ENCODINGDISPARITYERRORS
Object type
connUnitPortStatCountEncodingDisparityErrors
Description
The number of disparity errors received at this port
::= { connUnitPortStatEntry 50 }
FBSYSFRAMES
Object type
connUnitPortStatCountFBSYFrames
Description The number of times that FBSY was returned to this port as a result of a frame that could
not be delivered to the other end of the link. This occurs on SOFc1 frames (the frames
that establish a connection) if either the fabric or the destination port is temporarily
busy. The count is the sum of all classes. If you cannot keep the counters by class, keep
the sum counters.
::= { connUnitPortStatEntry 10 }
FRAMESRECEIVED
Object type
connUnitPortStatCountRxObjects
Description The number of frames, packets, IOs, and so on received by this port. A Fibre Channel
frame starts with SOF and ends with EOF. FC loop devices should not count frames
passed through. This value represents the sum total for all other Rx objects.
::= { connUnitPortStatEntry 5 }